This is a Malifaux Whiskey Golem painted for a friend. It was a real pain painting the metal trim. Simple is best however and I think for a simple prime and basecoat plus wash it looks pretty good. I was surprised once assemble how big he was, easily the size of an ork dreadnought from warhammer 40k. Most Malifaux models are tiny with low surface area. Some do get big and this is the biggest Malifaux model I've painted so far.
Wednesday, July 29, 2015
Malifaux Lucius Crew
A Malifaux Lucius Crew painted for a friend. I really like the guild models in this boxed set. I also like the creepy Lucius groupies in this box with their masks and robes.
Sunday, July 26, 2015
Malifaux Guild Reinforcements
This group was done for a painting challenge for the month of July. Originally I was just going to paint up the Pathfinder and his Traps, but then I threw in the 2 Executioners as well I really like the Executioner models but the feasibility that I will use them in a game is low as they are easy slow moving targets. Then I had some Guild Riflemen and Lone Marshall that were nearly done so I gave them a little extra push to be table ready. It can be really difficult to paint the faces of these guild models especially when they are wearing something that covers everything but their eye lenses. I did the best I could with the brushes I have. You can't really see the face detail and it is very small.
Warhammer 40k Traitor Guard
Sunday, May 24, 2015
Warhammer 40k Imperial Guard Vendetta
Basecoat
Highlighting with screaming skull in a combination of highlighting and drybrushing. The highlighting wasn't that bad actually as you might think it would be. I had the good painting energy that day and the whole job took me a few hours. They are just straight lines after all.
Painted engines, cockpit windows and aquila plus a few other detail in spots. I was kind of shocked at how little detail I felt needed to be picked out in another color. I added black and brown washes to the engines and a brown wash to the eagle. I also added a black wash to the windows but I'll probably give the windows another coat or two of light gray.
Now I'm waiting for my Forge World Vendetta conversion kit to arrive. Then after that, depending on how my summer goes, I may add the decals. Looking at the pictures now, there are a few detail areas I want to make silver and there are a few highlight lines I'd like to clean up. Damn, those engines look nice though. Maybe I will highlight them a little bit and also maybe create a burn trail along the back half of the aircraft.
The Forge World Vendetta conversion kit came very quickly. Here it is out of the box.
Here it is clipped and dry fitted together. The lascannons fit together very well but there is always the obligatory spare resin removal that has to happen.
I'm going to magnetize all of the weapons so I can field it both as a vendetta and a valkyrie if I need to. The first thing I need to do is trim off the top joint of the lascannons as you see below.
After it's trimmed it will look like this. In fact, if you wanted to you could go ahead and flatten out the entire top surface for an extra smooth and flat area to embed your magnets in.
You also have to cut off one of the joints on the missile pods like I did below. A nice flat surface to drill magnet holes into.
And you must cut off one of the four body fins on the missile, again, for a flat surface.
Here is the body joint that will house the magnets that are attached to the body unders the wing. I filled it will green stuff putty, trimmed and sanded it so it was flat.
Here is a picture of all of the weapon options for the valkyrie and the vendetta. There are quite a lot of bits to magnetize. I hope I will have enough magnets! There are the twin-linked lascannons of the vendetta as well as missile pods, hellstrike missiles and a nose lascannon and multi-laser for the valkyrie. Also, there is the nose sensor bit that goes on the bottom front of the cockpit.
In this picture below, you can see the black dots that will be the drill points for the magnet holes. The magnets are 2mm x 1mm. It will take very little drilling, just enough of a hole to be flush with the outside surface of the weapon.
Ok, I've got my bag of weapon options.
I've got my selection of modelling drill bits.
And I've got my magnets, which took forever to arrive. The first shipment got lost in the mail so the seller had to re-send the item after about 15 days (but he sent extra magnets to satisfy this buyer!). The magnets that I used for this are 2mm x 1mm. The larger magnets (2mm x 2mm) the seller sent me for the item being late I'm going to keep in my bits box. I'm sure I'll be able to find a use for them in time and so I won't be using them for this.
I ended up using a 5/16ths drill bit for this and the magnets fit nice and snug in the hole.
Again, there are the guide dots I used when drilling the holes in the weapons.
Thursday, May 14, 2015
Warhammer 40k Grey Knights Army
Grey Knights Librarian
Grey Knight Terminators and Brother-Captain Stern
Grey Knights Stormraven
Grey Knights Contemptor Dreadnoughts
Grey Knight Dreadnought
Grey Knight Rhinos
Grey Knight Rhinos with Razorback Lascannon Turrets
Grey Knights Strike Squads
Grey Knight Purifiers
Grey Knight Purgators
Grey Knight Terminators and Brother-Captain Stern
Grey Knights Stormraven
Grey Knights Contemptor Dreadnoughts
Grey Knight Dreadnought
Grey Knight Rhinos
Grey Knight Rhinos with Razorback Lascannon Turrets
Grey Knights Strike Squads
Grey Knight Purifiers
Grey Knight Purgators
Subscribe to:
Posts (Atom)