Sunday, May 24, 2015

Warhammer 40k Imperial Guard Vendetta

Basecoat

Highlighting with screaming skull in a combination of highlighting and drybrushing. The highlighting wasn't that bad actually as you might think it would be. I had the good painting energy that day and the whole job took me a few hours. They are just straight lines after all.




 
Painted engines, cockpit windows and aquila plus a few other detail in spots. I was kind of shocked at how little detail I felt needed to be picked out in another color. I added black and brown washes to the engines and a brown wash to the eagle. I also added a black wash to the windows but I'll probably give the windows another coat or two of light gray.
 




 
Now I'm waiting for my Forge World Vendetta conversion kit to arrive. Then after that, depending on how my summer goes, I may add the decals. Looking at the pictures now, there are a few detail areas I want to make silver and there are a few highlight lines I'd like to clean up. Damn, those engines look nice though. Maybe I will highlight them a little bit and also maybe create a burn trail along the back half of the aircraft.

The Forge World Vendetta conversion kit came very quickly. Here it is out of the box.


Here it is clipped and dry fitted together. The lascannons fit together very well but there is always the obligatory spare resin removal that has to happen.


I'm going to magnetize all of the weapons so I can field it both as a vendetta and a valkyrie if I need to. The first thing I need to do is trim off the top joint of the lascannons as you see below.


After it's trimmed it will look like this. In fact, if you wanted to you could go ahead and flatten out the entire top surface for an extra smooth and flat area to embed your magnets in.


You also have to cut off one of the joints on the missile pods like I did below. A nice flat surface to drill magnet holes into.


And you must cut off one of the four body fins on the missile, again, for a flat surface.


Here is the body joint that will house the magnets that are attached to the body unders the wing. I filled it will green stuff putty, trimmed and sanded it so it was flat.


Here is a picture of all of the weapon options for the valkyrie and the vendetta. There are quite a lot of bits to magnetize. I hope I will have enough magnets! There are the twin-linked lascannons of the vendetta as well as missile pods, hellstrike missiles and a nose lascannon and multi-laser for the valkyrie. Also, there is the nose sensor bit that goes on the bottom front of the cockpit.

 
So, unfortunately, the magnets have not arrived in the mail yet. I was hoping they'd get here so I could finish magnetizing and prime/re-prime the weapons. They'll be here in a few days. I've already started marking the places on each weapon where I'm going to drill the magnet holes. I'll take a picture of that next and post it soon. I need to make sure I get the magnet polarity right. I'm a little nervous about that. I just need to be careful what polarity I have before I jam any magnets in their holes. I did have some time to paint a few extra highlight lines and some other detail on the body today (because I didn't have the magnets). I will post that picture up to on my next update.

In this picture below, you can see the black dots that will be the drill points for the magnet holes. The magnets are 2mm x 1mm. It will take very little drilling, just enough of a hole to be flush with the outside surface of the weapon.
 
 
Ok, I've got my bag of weapon options.
 
 
I've got my selection of modelling drill bits.
 

And I've got my magnets, which took forever to arrive. The first shipment got lost in the mail so the seller had to re-send the item after about 15 days (but he sent extra magnets to satisfy this buyer!). The magnets that I used for this are 2mm x 1mm. The larger magnets (2mm x 2mm) the seller sent me for the item being late I'm going to keep in my bits box. I'm sure I'll be able to find a use for them in time and so I won't be using them for this.

 
 
I ended up using a 5/16ths drill bit for this and the magnets fit nice and snug in the hole.
 

 
Again, there are the guide dots I used when drilling the holes in the weapons.
 
 

Thursday, May 14, 2015

Warhammer 40k Grey Knights Army

Grey Knights Librarian


Grey Knight Terminators and Brother-Captain Stern


Grey Knights Stormraven


Grey Knights Contemptor Dreadnoughts


Grey Knight Dreadnought


Grey Knight Rhinos


Grey Knight Rhinos with Razorback Lascannon Turrets


Grey Knights Strike Squads




Grey Knight Purifiers


Grey Knight Purgators

Warhammer 40k Imperial Guard Chimeras

 


 

 
 
 
 

Wednesday, March 25, 2015

Malifaux Vengeful Spirits


Here is the Malifaux Vengelful Spirits boxed set + Hans (he's the guy in the gray trenchcoat on the left). When it comes to Malifaux, I don't have any inherent knowledge of what things are supposed to look like. I use the pictures on the cover of the box as my guide and I try to match the colors as closely as I can. As I look at this picture I feel I should paint the lady in the yellow dress' eyes and put some blood on the man's knife that he's using to cut his hear out. Maybe I'll do that!


Hans comes in a box all by himself. He's a cool figure but not particularly flamboyant color-wise. He does look like a badass mercenary which is what he is.

Saturday, March 14, 2015

Malifaux McMourning Crew


Here is the McMourning crew I painted for a friend. When they were done, I forgot to take a picture of them before I gave the models back. This picture was taken amidst some great hirst arts scenery and a playing mat that a person at our local gaming spot created. In my previous post I had painted many McMourning minions, and that's when it dawned on me that I had forgot to take the picture of McMourning.

Wednesday, March 11, 2015

Malifaux More McMourning Minions


More Dead Things raised up by the evil and twisted McMourning. I'm told all of these models are for use with McMourning when he is acting as a Resurrectionist. There are some Guild Autopsies, Crooligans-they look like mummified kids to me, The Drowned-murdered and dumped into the sea and resurrected, and Rafkin the Embalmer in the middle. His title tells you what his specialty is.

Tuesday, February 17, 2015

Necromunda Gangs


This is my Goliath Gang for the discontinued Games Workshop game, Necromunda. If you're seeing this, you're probably familiar with the game. This gang has been painted for at least a year, maybe two, but is only now getting a picture. There is 1 extra model in there beyond the original 8 that came in the box. I believe I had the heavy bolter heavy trooper before I got the rest of the gang on ebay.


This is my Van Saar Gang, again, for Necromunda. The game seems to have a cult following of people who play it back in the day when it was being produced. I think a lot of gamers got involved with it many years after it was discontinued to be honest. The internet has been fertile ground for spreading the popularity of this skirmish game set in the 40k universe. This gang I purchased off of a friend. It is just the original 8 gang members from the boxed set.

There are a few other gangs I like the style of, specifically the Cawdor Gang and also the Delaque Gang. The Cawdor Gang, aside from the Goliath Gang is my favorite stylistically. However, after trying to chase down the models on ebay the price never seems to be right when I'm looking to buy. Give me enough time and I'll get them I suppose. Unfortunately, no one is playing this in my circle of gaming friends. There was a little talk of using some of the gangs for Infinity.